Two-fold Slide Rail
Forming method: Continuous roll forming
Surface coating: High-density electrophoretic coating
Salt spray test: 48 hours neutral salt spray
Steel ball material: High carbon chrome bearing steel
Guangzhou Fengcheng Industrial Co., Ltd. makes this Two-fold slide rail. We have made hardware for more than 10 years. Our factory covers 3350 square meters. We have over 60 workers. Our own R&D team has 15 design engineers. They are very experienced. Our monthly output reaches 5 million pieces. This amount helps us supply wholesalers without delay. The product uses a two-fold structure. It fits cabinets, desks, and narrow cabinets. Many furniture designs with limited space choose it. The opened length is two times the side panel depth. It works well for shallow drawers and keyboard trays. We have done OEM for many global hardware brands. They have strict quality needs. We passed their checks. This shows our Two-fold slide rail meets international standards.
|
Feature |
Data |
|
Material |
High quality cold-rolled steel |
|
Forming method |
Continuous roll forming |
|
Surface coating |
High-density electrophoretic coating |
|
Salt spray test |
48 hours neutral salt spray |
|
Steel ball material |
High carbon chrome bearing steel |
|
Length options |
250 mm to 500 mm |
|
Minimum cabinet depth saving |
About 15% vs traditional three-fold rail |
|
Opening ratio |
90% |
|
Noise level |
Below 35 dB |
|
Load capacity (450mm length) |
25 kg safe working load |
|
Separation design |
Detachable pin design |
|
Installation gap |
12.7 mm per side |
|
Cycle test |
50,000 open-close cycles without damage |
Our product has a special mixed design. It uses precision nylon rollers and steel balls inside. The pulling sound stays below 35 decibels. That is quieter than a soft whisper. We tested the 450 mm length single rail. Its safe load reaches 25 kg. Even with full dishes or heavy books, it pulls and pushes easily. We use a detachable pin design. You install the outer and inner rails separately first. Then you place the cabinet and drawer in position. After that you combine them. One person can finish the setup. This saves a lot of time. We did 50,000 open-close cycle tests. No damage happened. The single side installation gap is only 12.7 mm. This Two-fold slide rail matches modern furniture standards very well.
We support OEM and ODM orders. You can send us your own design drawings. We make samples according to your drawings. Samples are ready in 7 days. The minimum order quantity is 500 to 1000 pieces. Some products allow mixing of colors and models. Bulk production time is 10 to 15 days. We do 100% full inspection. We make sure bulk goods match the samples. We offer a 12-month warranty. If there is a quality problem, we solve it for you quickly. Our experience with global brands helps you reach higher markets. The product is a smart choice for your business.
Hot Tags: two-fold slide rail, China two-fold slide rail manufacturers, suppliers, factory
You Might Also Like
Send Inquiry